Skip to content
K R JPainting Services

Cladding & Exteriors

Cladding Delamination Repair & Matched Respraying

Assess, stabilise or rebuild separated cladding skins, then refinish to match. Hundreds of repairs completed; site access determines the method.

01908 538149

Separated cladding skins stabilised or rebuilt with fibreglass, then profiled and resprayed to suit the panel.

Stabilise separated skins before damage spreads

Delamination occurs when the outer skin separates from the cladding panel beneath it. What looks like a surface bubble can involve a wider loose section, so we first establish the extent of separation, panel construction and position of the defect. Rear access matters. Where the back of the wall cannot be reached, we can stabilise the loose skin with self-tapping screws before filling, shaping and spraying the area.

The fixings become part of a built repair rather than a visible final detail. With hundreds of delamination repairs completed, we select the method around the actual panel instead of treating every lifted skin as the same problem.

A different repair when the rear is visible

Where the rear face is accessible, the delaminated section can be removed and replaced with a fibreglass-reinforced repair. We build the affected skin back up, fill the surface and profile it to meet the surrounding panel before respraying. Paint can be produced to a requested RAL or BS reference, then adjusted on site where weathering has shifted the existing colour. The correct approach depends on more than defect size.

We also consider where the panel sits, how it can be reached and whether surrounding interfaces limit access. Our survey records those points so the repair build-up is decided before loose material is cut away or fixed down.

The repair method follows the panel

01

Rear access checked first

We establish whether the wall can be reached from behind before choosing a method.

02

Loose skins secured

Inaccessible panels can be stabilised before filling and surface profiling.

03

Colour finished on site

In-house tinting helps us adjust the sprayed finish beside weathered panels.

Technical tool

Cladding damage scope builder

Four short steps to prepare a clear remedial brief for a site survey. It is not an automated quotation and does not confirm a repair method.

  1. 01Project stage
  2. 02Surface & defect
  3. 03Scope
  4. 04Review

Step 1 of 4 — Project stage

25%

FAQs

Project questions

Next step

Get the delamination assessed on site

Call us with defect photographs and access details so we can discuss the panel and likely repair route.

01908 538149